Cat6 Shielded Patch Cable
Cat6 FTP shielded patch cables rated 10 Gbps at 550 MHz on 23 AWG bare copper. Foil twisted-pair construction wraps all four pairs, suppressing EMI and RFI pickup along with alien crosstalk between cables bundled tightly together.
Specify these for industrial floors, mechanical rooms, medical and broadcast areas, and dense data center bundles. Pair them with shielded RJ45 jacks and a grounded patch panel so the shield is continuous end to end.
BULK ORDER
Order by length and color
Pick a pack size, type quantities for any lengths and colors, then add them all to the cart at once. Prices are per pack.
Prices are per pack. Every color of the same length and pack is the same price. — means that combination isn't stocked; ask for a custom build.
Cat6 Shielded Patch Cable, Black
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, White
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, Red
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, Green
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, Blue
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, Purple
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, Gray
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, Orange
0.5 Ft – 200 Ftpacks to 100
Cat6 Shielded Patch Cable, Yellow
0.5 Ft – 200 Ftpacks to 100
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Questions about Cat6 Shielded Patch Cable
Do shielded patch cables need to be grounded?
Yes. A shield only drains noise when it is bonded end to end, so terminate into shielded jacks and a grounded patch panel or switch. An unbonded shield gives little benefit. For clean office and residential runs, unshielded (UTP) cable is simpler and cheaper.
Where should I use shielded Cat6?
Industrial floors, mechanical rooms, medical and broadcast areas, and dense data center bundles where electrical noise or alien crosstalk is a concern. Pair them with shielded RJ45 jacks and a grounded patch panel.
What lengths and pack sizes does the Cat6 Shielded Patch Cable come in?
Available lengths: 0.5 Ft, 1 Ft, 2 Ft, 3 Ft, 4 Ft, 5 Ft, 6 Ft, 7 Ft, 10 Ft, 15 Ft, 20 Ft, 25 Ft, 50 Ft, 75 Ft, 100 Ft, 125 Ft, 150 Ft, 175 Ft, 200 Ft. Sold in packs of 1, 10, 50, 100 where stocked (1 = single cable). Every color of the same length and pack is the same price.
What are the specifications of the Cat6 Shielded Patch Cable?
Category Cat6; shielding FTP; conductor 23AWG, 4-pair stranded bare copper; connector 50 micron gold-plated shielded RJ45, molded boot; jacket CM-type PVC; wiring T568B (AT&T 258A); max speed 10 Gbps; bandwidth 550 MHz; certifications TIA/EIA, UL/cUL, RoHS.
Are Cat6 Shielded Patch Cables pure copper?
Yes. They use 100% bare copper conductors, not copper-clad aluminum (CCA), with 50 micron gold-plated RJ45 contacts.